.
23-7-28 USN: Carriers vs (AAS) LHDs & LHAs - nwyt > . skip > .
110 years ago Glenn Hammond Curtiss, at the time called by the press “the fastest man alive,” ate lunch with the officers of the armored cruiser USS Pennsylvania. It was a more auspicious event than it sounds, because that lunch represented what some describe as “the birth of naval aviation”.
On November 14, 1910, Curtiss demonstration pilot Eugene Ely took off from a temporary platform mounted on the forward deck of the cruiser USS Birmingham. His successful takeoff and ensuing flight to shore marked the beginning of a relationship between Curtiss and the Navy that remained significant for decades. At the end of 1910, Curtiss established a winter encampment at San Diego to teach flying to Army and Naval personnel. Here, he trained Lt. Theodore Ellyson, who became U.S. Naval Aviator #1, and three Army officers, 1st Lt. Paul W. Beck, 2nd Lt. George E. M. Kelly, and 2nd Lt. John C. Walker, Jr., in the first military aviation school. (Chikuhei Nakajima, founder of Nakajima Aircraft Company, was a 1912 graduate.) The original site of this winter encampment is now part of Naval Air Station North Island and is referred to by the Navy as "The Birthplace of Naval Aviation".
Through the course of that winter, Curtiss was able to develop a float (pontoon) design that enabled him to take off and land on water. On January 26, 1911, he flew the first seaplane from the water in the United States. Demonstrations of this advanced design were of great interest to the Navy, but more significant, as far as the Navy was concerned, was Eugene Ely successfully landing his Curtiss pusher (the same aircraft used to take off from the Birmingham) on a makeshift platform mounted on the rear deck of the battleship USS Pennsylvania. This was the first arrester-cable landing on a ship and the precursor of modern-day carrier operations. On January 28, 1911, Ellyson took off in a Curtiss “grass cutter” to become the first Naval aviator.
Curtiss custom built floats and adapted them onto a Model D so it could take off and land on water to prove the concept. On February 24, 1911, Curtiss made his first amphibious demonstration at North Island by taking off and alighting on both land and water. Back in Hammondsport, six months later in July 1911, Curtiss sold the U.S. Navy their first aircraft, the A-1 Triad. The A-1, which was primarily a seaplane, was equipped with retractable wheels, also making it the first amphibious aircraft. Curtiss trained the Navy's first pilots and built their first aircraft. For this, he is considered in the US to be "The Father of Naval Aviation". The Triad was immediately recognized as so obviously useful, it was purchased by the U.S. Navy, Russia, Japan, Germany, and Britain. Curtiss won the Collier Trophy for designing this aircraft.
Around this time, Curtiss met retired British naval officer John Cyril Porte, who was looking for a partner to produce an aircraft with him to win the Daily Mail prize for the first transatlantic crossing. In 1912, Curtiss produced the two-seat Flying Fish, a larger craft that became classified as a flying boat because the hull sat in the water; it featured an innovative notch (known as a "step") in the hull that Porte recommended for breaking clear of the water at takeoff. Curtiss correctly surmised that this configuration was more suited to building a larger long-distance craft that could operate from water, and was also more stable when operating from a choppy surface. With the backing of Rodman Wanamaker, Porte and Curtiss produced the America in 1914, a larger flying boat with two engines, for the transatlantic crossing.
Through the course of that winter, Curtiss was able to develop a float (pontoon) design that enabled him to take off and land on water. On January 26, 1911, he flew the first seaplane from the water in the United States. Demonstrations of this advanced design were of great interest to the Navy, but more significant, as far as the Navy was concerned, was Eugene Ely successfully landing his Curtiss pusher (the same aircraft used to take off from the Birmingham) on a makeshift platform mounted on the rear deck of the battleship USS Pennsylvania. This was the first arrester-cable landing on a ship and the precursor of modern-day carrier operations. On January 28, 1911, Ellyson took off in a Curtiss “grass cutter” to become the first Naval aviator.
Curtiss custom built floats and adapted them onto a Model D so it could take off and land on water to prove the concept. On February 24, 1911, Curtiss made his first amphibious demonstration at North Island by taking off and alighting on both land and water. Back in Hammondsport, six months later in July 1911, Curtiss sold the U.S. Navy their first aircraft, the A-1 Triad. The A-1, which was primarily a seaplane, was equipped with retractable wheels, also making it the first amphibious aircraft. Curtiss trained the Navy's first pilots and built their first aircraft. For this, he is considered in the US to be "The Father of Naval Aviation". The Triad was immediately recognized as so obviously useful, it was purchased by the U.S. Navy, Russia, Japan, Germany, and Britain. Curtiss won the Collier Trophy for designing this aircraft.
Around this time, Curtiss met retired British naval officer John Cyril Porte, who was looking for a partner to produce an aircraft with him to win the Daily Mail prize for the first transatlantic crossing. In 1912, Curtiss produced the two-seat Flying Fish, a larger craft that became classified as a flying boat because the hull sat in the water; it featured an innovative notch (known as a "step") in the hull that Porte recommended for breaking clear of the water at takeoff. Curtiss correctly surmised that this configuration was more suited to building a larger long-distance craft that could operate from water, and was also more stable when operating from a choppy surface. With the backing of Rodman Wanamaker, Porte and Curtiss produced the America in 1914, a larger flying boat with two engines, for the transatlantic crossing.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.